ASTM 2105 DRIVER

The grips shall be designed so that no crushing load shall be applied to the pipe ends. Note 4 — Reinforcements of plastics with glass fiber offer wide opportunities for designing and producing products with markedly different responses to loading even when the basic geometry of the product is similar. Link to Active This link will always route to the current Active version of the standard. For referee tests, the resolution of discrepancies must be resolved between the purchaser and the seller. Individual reprints single or multiple copies of this standard may be obtained by contacting ASTM at the above address or at phone , fax , or service astm. Hence, when comparative tests of materials per se are desired, the greatest care must be exercised to ensure that all samples are prepared in exactly the same way; similarly, for referee or comparative tests of any given series of specimens, care must be taken to secure the maximum degree of uniformity in details of preparation, treatment, and handling.

Uploader: Nikolkis
Date Added: 15 February 2006
File Size: 7.69 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 92792
Price: Free* [*Free Regsitration Required]

The test specimen shall be held in such a way that slippage relative to the grips is prevented insofar as possible.

Referenced Documents purchase separately The documents listed below are referenced within the subject standard but are not provided as part of the standard.

NOTE 3—It is realized that the method of preparation of a material asttm one of the many variables that affect the results obtained in testing a material.

ASTM D2105 – 01(2014)

The asrm may involve collecting discrete evolved gas samples or, more commonly, may involve passing the evolved gas through a heated flowcell during the TGA experiment.

The evolved gas analysis performed with an STA instrument 5 is similar to that with a TGA, and so, would be covered by this practice. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Sstm applications require more suitable tests, such as impact, creep, and fatigue.

  GIANT FOOD PEAPOD DRIVER

For referee tests, astn resolution of discrepancies must be resolved between the purchaser and the seller. Hence, when comparative tests of materials per se are qstm, the greatest care must be exercised to ensure that all samples are prepared in exactly the same way; similarly, for referee or comparative tests of any given series of specimens, care must be taken to secure the maximum degree of uniformity in details of preparation, treatment, and handling.

Specimens shall be carried to failure. With this arrangement, the long axis of the test specimen will coincide with the direction of the applied pull through the center line of the grip assembly.

ASTM D E R_百度文库

Please refer to Test Method E for more information. Express the result as a dimensionless ratio per second units per second and report it to three signi? Stressstrain data at several levels of temperature, humidity, time, or other variables may be needed to furnish reasonably accurate indications of the behavior of the material. Further, it is realized that variations in the thicknesses of test specimens, which are permitted by these procedures, produce variations in the surface-volume ratios of such specimens, and that these variations may in?

It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

This practice assumes that the thermogravimetry involved in the practice is proper.

Larger sizes may be tested if required apparatus is available. NOTE 5—It is recognized that the constant rate-of-crosshead-movement type of test leaves much to be desired from a theoretical standpoint, that wide differences may exist between gage marks on the specimen, and that the testing speeds speci? If only the latter is obtained, load-time data must also be taken.

NOTE 4—Reinforcements of plastics with glass? Different pipe producers have chosen, by design, to offer products having different balances of resistance to asym stressing conditions.

In the case of pipe for general? Larger sizes may be tested if required apparatus is available. Note 4 — Reinforcements of plastics with glass fiber offer wide opportunities for designing and producing products with markedly different responses to loading even when the basic geometry of the product is similar. Hence, when comparative tests of materials per se are desired, the greatest care must be exercised to ensure that all samples are prepared in exactly the same way; similarly, for referee or comparative tests of any given series of specimens, care must be taken to secure the maximum degree of uniformity in details of preparation, treatment, and handling.

  FANATEC PORSCHE 911 TURBO S DRIVER

No other units of measurement are included in this standard.

There was a problem providing the content you requested

Note 3 — It is realized that the method of preparation ashm a material is one of the many variables that affect the results obtained in testing a material.

If you feel that your comments have not received a fair hearing you should make your views known to the ASTM Committee on Standards, at the address shown below. As a result, it is important that the purchaser and the seller both have a clear understanding and agreement on the significance of this test method relative to the intended use.

The accuracy of the testing machine shall be veri? Note 2 — There is no known ISO equivalent to this standard. ASTM International takes no position respecting the validity qstm any patent rights asserted in connection with any item mentioned in this standard.

The grips shall be designed so that no crushing load shall be applied to the pipe ends. Last previous edition approved in as D — The grips shall be self-aligning; that is, they shall be attached to the?

Tighten the grips evenly and?